HeatRay Non-Glowing Heaters provide high-performance radiant warmth without visible light, making them the ideal solution for design-conscious environments. Engineered for ceiling or wall installation, these heaters can also be integrated into pergolas, trellises, gazebos, conservatories, marquees, and commercial-grade patio umbrellas. With vandal-resistant construction and suitability for both indoor and outdoor applications, HeatRay ensures reliable heating while preserving the architectural aesthetics of any space.
HeatRay goes beyond traditional product selection by offering an interactive 3D experience of our heated umbrella systems. With this tool, clients can explore design details, mounting options, and the seamless integration of Non-Glowing Heaters into different structures. By visualizing how HeatRay solutions will perform in real settings, clients gain the confidence to choose the perfect system for their outdoor or indoor space.
Every HeatRay Non-Glowing Heater is built with precision, durability, and performance at its core. Designed for both indoor and outdoor applications, these heaters combine water resistance, adjustable heat control, multi-zone operation, and international safety compliance to provide unmatched reliability. Each feature is thoughtfully engineered to ensure efficient energy use, consistent comfort, and long-term dependability, making HeatRay the trusted choice for creating safe and comfortable environments in any setting.
Non glowing panels are IP X5 (NEMA 4) rated, which means they are protected against unforeseen exposure to rain or water jets. This enables the heaters to be installed outdoors and safely washed and rinsed with low pressure water cleaners and garden hoses.
Two-stage HIGH - LOW heat output allows the provision of an optimum heat comfort when experiencing varying ambient cold conditions. This arrangement brings additional benefit of lowering the overall power consumption, thus the running costs, when higher heating power is not needed.
Each heating panel covers 15 sq ft - 30 sq ft of floor space depending on the installation height and final application.
The HeatRay Non glowing heating system aims soft energy in a specific direction to warm people and objects in its path, instead of wasting energy trying to heat unoccupied spaces.
Why run heaters in areas that are not in use, operate multiple groups of heaters independently of each other (up to 4, 8 or 12 heaters per heating zone) with dedicated Heatray control modules.
HeatRay Non Glowing Radiant Panel Heaters have undergone extensive independent laboratory testing to establish full compliance to the UL & CSA Listing in US & Canada as well as European CE marking and Australian & New Zealand AS /NZ Certification. Above approvals incorporate Compliance with Outdoor Usage, as well as Design Integrity, Product Application and Heat Effect on Structures.
Dimensions (L/W/H):
37½” x 6″ x 2″
Weight:
14 pounds (without mounting bracket)
Power Requirements:
1.2kW / 10A – 120V / 1Ph / 60Hz
Heating Coverage:
16 sqr ft – 30 sqr ft, depending on the application.
Dimensions
37½”L x 6″W x 2″H
Weight
14lb without mounting bracket
Power Connection
Wire allocation in
the supply cable
Supplied with 5ft of 4 Core + GND ‘pigtail’ cable
Conductor #1 – Hot for heating Circuit A
Conductor #2 – Hot for heating Circuit B
Conductor #3 – Neutral for heating Circuit A
Conductor #4 – Neutral for heating Circuit B
Mounting
Wall / Ceiling Mount Brackets / Under Beam
Side Beam / Ceiling Recessed / Mount Brackets
Application
Indoor and Outdoor Use
USA / Canada
Total input power: 1200 Watts
Input power per stage: 600 Watts
Working Voltage: 120 Volt / 1Ph / 60Hz
Total current load: 10 Amp
Current per heating stage: 5 Am
NOTES:
Non glowing heating panels can be indirectly connected to 208V/120V 3-Phase / 4-wire / WYE / or 240 Volt Split-Phase with Mid-Point Neutral Power system when properly interfaced via HeatRay’s POWER CONTROL MODULES.
Please refer to the TECHNOLOGY tab & ELECTRICAL DIAGRAM section of our website for further details
Non-glowing heaters can be mounted using U-shaped ‘Ceiling/Wall Brackets’. These are available in a number of sizes to provide a 5″, 8″, 12″ or 18″ drop from the ceiling or an offset from the wall.
CWMB-5
This bracket allows the heating panel to be suspended 5 inches below the ceiling.
CWMB-8
This bracket allows the heating panel to be suspended 8 inches below the ceiling.
CWMB-12
This bracket allows the heating panel to be suspended 12 inches below the ceiling.
CWMB-18
This bracket allows the heating panel to be suspended 18 inches below the ceiling.
For areas where the ceiling is at the appropriate height, Non-glowing heaters can be mounted flush with the ceiling by utilizing ‘Ceiling Recess Units’.
CFM
Ceiling Recess Unit.
When a ceiling is higher than 8 feet, Non-glowing heaters will need to be dropped to the optimal mounting height by implementing ‘Ceiling Tube Suspension’ units. The standard length of the suspension tubes is 36″ and can be trimmed on-site to any shorter length.
CSTS
Ceiling Single Tube Suspension.
To allow Non-glowing radiant patio heaters to be grouped into pairs, ‘Ceiling Double Tube Suspension’ units are required. This system allows the paired heaters to be mounted at the optimal mounting height of 8 feet. The standard length of the suspension tube is 36″ and can be trimmed on-site to any shorter length.
CDTS
Ceiling Double Tube Suspension.
Non-glowing heaters can be easily integrated with the entire range of our HeatRay Heated Umbrellas. The radiant Non-glowing heaters get seamlessly attached under the arms of the patio umbrellas for optimal warmth distribution.
UMB M RAIL
Umbrella Mounting Rail.
UMB-DHB 2.0
Umbrella double mounting unit for non-glowing heaters.
UMB-DHB 2.5
Umbrella double mounting unit for non-glowing heaters.
From flexible modular layouts to sleek tensile designs and striking architectural structures, HeatRay Non-Glowing Heaters provide solutions built for versatility and efficiency. Every unit ensures targeted warmth, reduced energy waste, and effortless integration into any environment.
HeatRay is committed to delivering precision-engineered Non-Glowing Heaters that provide safe, efficient, and long-lasting comfort for any environment. Perfectly suited for modular layouts, tensile installations, and integration into architectural structures, these heaters ensure your outdoor and indoor spaces remain inviting year-round.
From commercial patios and restaurants to private terraces and recreational areas, HeatRay’s Non-Glowing Heaters offer quiet, energy-efficient warmth that enhances both functionality and aesthetics. Reach out today to speak with our experts and discover how HeatRay can transform your space into a comfortable, all-season destination.
